R & D : Mechanical Engineering
Journal Paper
2018-19
- Effect of different chill parameters on solidification of casting – A Review
Author:Mamta Patel
Journal:International Journal of Technical Innovation in Modern Engineering & Science
E-ISSN: 2455-2585
- Fabrication and parametric analysis of waste plastic to fuel – a review paper
Author:Mamta Patel
Journal:International Journal of Technical Innovation in Modern Engineering & Science
E-ISSN: 2455-2585
- A Review paper on Aerodynamic Drag Reduction and CFD Analysis of Vehicles
Author:Subhashish Sarkar
Journal:International Research Journal of Engineering and Technology
ISSN:2395-0056
- A Review Paper On Magneto-Rheological Fluid based Braking system
Author:Subhashish Sarkar
Journal:International Journal of Research and Analytical Reviews
E-ISSN:2348-1269
- A Review Paper on- Evolution of cutting fluid mixed with nano particles on surface roughness and tool wear
Author:ChetankumarGohel
Journal: Intentional journal of science and research
E-ISSN: 2319-7064
- Drilling of GFRP Composite : A Review
Author:Vyomesh R. Buch
Journal:International Journal of Recent Scientific Research
E-ISSN:0976-3031
DOI: 10.24327/ijrsr.2018.0909.1783
- Finite Element Analysis of Non Metallic Helical Gear
Author: Sanjay Ansodariya
Journal:Intenational Journal of futuristic trends in engineering and technology
E-ISSN:2348-4071
- Review of lean-green manufacturing practices in SMEs for sustainable framework
Author:MandarSumant
Journal: International Journal of Business Innovation and Research
ISSN online: 1751-0260
ISSN print: 1751-0252
- Variation in Aerodynamic Drag and Lift by addition of rear spoiler in a passenger car
Author:Subhasis Sarkar
Journal:Journal of Emerging Technologies and Innovative Research
ISSN online:2349-5162
- A Review Paper On Rotational Energy Harnessing From A Non-Fixed Axis System
Author:Subhasis Sarkar
Journal:Journal of Emerging Technologies and Innovative Research
ISSN online:2349-5162
- Modeling of Machining Parameters of Structural Steel using Plasma Arc Cutting: A Response Surface Approach
Author:Ketul Patel
Journal:International Journal of Engineering Research and Technology
- Optimizing Plasma Arc Cutting Parameters for Structural Steel using Grey Relational Analysis
Author:Ketul Patel
Journal:International Journal of Engineering Research and Technology
- Structural shape optimization with meshless method and swarm-intelligence based optimization
Author:SachinDaxini
Journal:International Journal of Mechanics and Materials in Design
ISSN (P): 1569-1713
ISSN(E): 1573-8841
Numerical shape optimization based on meshless method and stochastic optimization optimization
Author: SachinDaxini
Journal: Engineering with Computers
ISSN (P): 0177-0667
ISSN(E): 1435-5663
Author:GaurangRohit
Journal: International Journal of Computational Methods
ISSN (P): 0219-8762
ISSN (E): 1793-6969
- Prioritizing the performance outcomes due to adopting of critical success factors of supply chain remanufacturing
Author:Zulfiquar Ansari
Journal: Journal of Cleaner Production, Elsevier
ISSN (P): 0959-6526
2017-18
- Hydro Carbon and Carbon Monoxide Reduction from Exhaust of Vehicles
Author:RonakSoni
Journal: International Journal of Engineering Advanced Technology
E-ISSN:2249-8958
- Bonding of Thermoplastic Material: A lilterature review
Author:Pritesh Patel
Journal:International Research Journal of Engineering and Technology
E-ISSN: 2395-0056
- Productivity Improvement by Implementing Lean Manufacturing Tools in
Manufacturing Industry
Author:Pritesh Patel
Journal:International Research Journal of Engineering and Technology
E-ISSN: 2395-0056
- Modification and Experimental Analysis of Motorcycle Exhaust System with Use of Exhaust Emission Reducer Material
Author:Vishvash Patel
Journal:International Journal of Advance Enginering and Research Development
E-ISSN:2348-4470
- 2D Simulation Studies on Use of Boundary Layer Trip for Airfoil E216
Author:Vishvash Patel
Journal:International Journal for Research in Applied Science and Engineering Technology
E-ISSN:2321-9653
- Development of Software for Design of Hydrodynamic Journal Bearing
Author:Pratik P Patadia
Journal:International Journal of Innovative Research in Technology
ISSN:2349-6002
- Experimental Investigation of 1.5 Tonne Air Conditioning System by using Heat Pipe
Author:NitinPawar
Journal:International Journal of Engineering and Management Research
ISSN:2394-6962
- A Review Report for Study of dry Drilling on completely different Materials exploitation numerous machining strategies
Author:Sanjay Ansodariya
Journal:Journal of Mechatronics and Automation
ISSN:2455-1988
- A Literature review on the Development of Tube’s Inner Surface Polishing
Author:MandarSumant
Journal:Journal of Basic and Applied Engineering Research
ISSN (P): 2350-0077
ISSN (E): 2350-0255
10. Design and Fabrication of Maize Shelling Machine
Author: MandarSumant
Journal: Journal of Material Science and Mechanical Engineering
ISSN: (P): 2393-9095
ISSN (E): 2393-9109
11. Parametric shape optimization techniques based on Meshless Methods: A review
Author: SachinDaxini
Jounral:Structrual and Multidisciplinary Optimization
ISSN: 1615-147X (Print)
ISSN: 1615-1488 (Online)
12. Exploring the framework development status for sustainability in supply chain management: A systematic literature synthesis and future research directions
Author: Zulfiquar Ansari
Journal:Business Strategy and the Environment
ISSN (P): 1099-0836
13. Design for disassembly to attain sustainability: Analyzing the past and proposing further research opportunity
Author:Zulfiquar Ansari
Journal:IUP Journal of Supply Chain Management
ISSN (P): 0972-9267
2016-2017
1. Hydrogen based internal combustion engine
Author:Subhasis Sarkar
Journal:International Journal of Scientific Research and Development (IJSRD)
ISSN:2321-0613
- Research paper on bladeless windmills based on the principle of vibration
Author:Subhasis Sarkar
Journal:International Journal of Scientific Research
ISSN:2277-8179
- Bladeless turbine – A review
Author: Pratik Patel
Journal: International Journal of Mechanical Engineering & Technology (IJMET)
ISSN:0976-6340
- Acoustically driven refrigeration device: A review
Author:Pratik Patel
Journal:International Journal of Mechanical Engineering & Technology (IJMET)
ISSN:0976-6340
- Design of a simplified vertical conveyor system
Author:Alok Kumar Dwivedi
Journal:International Research Journal of Engineering and Technology
ISSN:2395 -0056
- Performance analysis of concentric tube solar water heater
Author:Ramesh Mevada
Journal:International Journal for Innovative Research in Science & Technology
- Experimental and simulation progress on deep drawing process.
Author:Sanjay Ansodariya
Journal:International Journal of Scientific Research and Development
ISSN:2321-0613
- Experimental evaluation and optimization of dry drilling parameters of stainless steel using different drill bit
Author:Sanjay Ansodariya
Journal: Journal of Materials and Metallurgical Engineering
ISSN:2321-4236
- Experimental analysis of spiral heat exchanger
Author:Ketan N. Jambu
Journal:International Journal of Advance Research in Engineering Science and Technology
ISSN:2393-9877
- A state of art literature review reflecting 15 years of focus on sustainable supply chain management
Author:Zulfiquar Ansari
Journal: Journal of Cleaner Production
ISSN:0959-6526
2015-2016
- Design and fabrication of automatic main stand for two-wheelers
Author:Alok Kumar Dwivedi
Journal:International Journal for Scientific Research & Development
ISSN: 2321-0613
- Design and fabrication of automatic main stand for two-wheelers
Author:Nirmal Kumar Kushwaha
Journal:International Journal for Scientific Research & Development
ISSN: 2321-0613
- Design, development and comparison of double pipe heat exchanger with conventional and annular baffles
Author:Mukund B. Pandya
Journal:International Journal of Advance Research in Engineering Science and Technology
ISSN:2393-9877
- Sustainability in supply chain management: An overview
Author:Zulfiquar Ansari
Journal:IUP Journal of Supply Chain Management
ISSN: 0972-9267
2014-2015
- Simulation of bucket of bucket wheel stacker reclaimer
Author:Ankur P Patel
Journal:International Journal of Engineering Development and Research
ISSN: 2321-9939
- Identify the lean tool for different industrial sectors in India
Author:MandarSumant
Journal:International Journal of Engineering Development and Research (IJEDR)
ISSN:2321-9939
- Importance of lean tools and techniques in industrial sectors: a literature review
Author:MandarSumant
Journal:International Journal of Applied Engineering Research (IJAER)
ISSN:0973-4562
- Parametric analysis of deep drawing process for hemisphere dome shape of Steel AISI 1023
Author:MandarSumant
Journal:Journal of Basic and Applied Engineering Research(JBAER)
ISSN:2350-0077, 2350-0255
- A review of circular solar water collector for close water open air (CWOA) air heated humidification and dehumidification process
Author:MandarSumant
Journal:Journal of Basic and Applied Engineering Research(JBAER)
ISSN:2350-0077, 2350-0255
- Theoretical model of circular solar collector for close water open air (CWOA) heated humidification and dehumidification
Author:MandarSumant
Journal:International Journal of Renewable Energy and Environmental Engineering (IJREEE)
ISSN:2348-0157
- Effect of Air inlet temperature on performance of circular solar collector for close-water open-air (CWOA) air heated humidification –dehumidification process
Author:Mandar Sumant
Journal:International Journal of Advance Engineering and Research Development (IJAERD)
ISSN: 2348-4470, 2348-6406
- Effect of overall Heat loss coefficient on performance of Circular Solar collector for close water open air (CWOA) humidification dehumidification process
Author:MandarSumant
Journal:International Journal of Advance Engineering and Research Development (IJAERD)
ISSN:2348-4470, 2348-6406
- Performance of Circular Solar collector for Close Water Open Air (CWOA) Air heated humidification-dehumidification process for finding the effect of Air flow rate on efficiency of solar air heater
Author:MandarSumant
Journal:International Journal of Renewable Energy and Environmental Engineering
ISSN:2348-0157
- Condition based monitoring of rotating machines using piezoelectric material
Author:Nirmal Kumar Kushwaha
Journal:International Journal of Research in Engineering and Technology
ISSN:2319-1163, 2321-7308
Conference Papers
2019-20
- An analysis of remanufacturing supply chain economic risks using fuzzy SWARA
Author:Zulfiquar Ansari
5th International Conference on Industrial Engineering (ICIE-2019)
2017-18
- Expert System for Design of Compound Die Components
Author:Ronak D. Soni
PiCET – International Conference, PU
- Review of Lean Manufacturing Philosophy in Manufacturing SMEs to Identify Critical Success Factors
Author:MandarSumant
Proceedings -4th International conference on Industrial Engineering, ICIE 2017
ISBN: 978-93-86238-39-9
- A Literature Review on Drivers and Barriers of Green Manufacturing
in Indian / Global SME’s
Author:MandarSumant
Proceedings -4th International conference on Industrial Engineering, ICIE 2017
ISBN: 978-93-86238-39-9
2016-17
- Study of Mechanical and Structural properties of PCL/TCP composite using Selective Laser Sintering
Author:MandarSumant
Proceedings of 2nd International Conference on Emerging Trends in Mechanical Engineering
ISBN: 978-93-84659-77-6
2015-16
- Expert system for designing of compound die for washer manufacturing
Author:Ronak D. Soni
International Conference – Copen 9, IIT-B
- Meshless formulation and parameters study for an elastic bar problem
Author:SachinDaxini
International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) , DMI College of Engineering, Chennai
DOI – 10.1109/ICEEOT.2016.7754975
- Parametric study in Element Free Galerkin method for an elastic bar
Author:SachinDaxini
International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) , DMI College of Engineering, Chennai
DOI – 10.1109/ICEEOT.2016.7754740
2014-15
- Scope of expert system in product development and manufacturing cycle
Author:Ronak D. Soni
Conference:MEGRES – 15
Patents filed
| Sr. No. | Application Number | Filing Date | Applicants | Inventors | Title of Invention | Status (Applied / Published / Granted) |
| 1. U | 201921013579 | 04/04/2019 | Unraniya Ravi Sanjaybhai, Katharotiya Viraj Sureshbhai, Parmar Vipul Govindbhai, Patel Shreya Narendrabhai, Vasava Shivani Manubhai | Unraniya Ravi Sanjaybhai, Katharotiya Viraj Sureshbhai, Parmar Vipul Govindbhai, Patel Shreya Narendrabhai, Vasava Shivani Manubhai | BAND SAW BLADE TENSION AND BREAKAGE SENSOR
(Guided by: Pratik Patel) |
Publication No.16/2019
Publication Date: 19/04/2019 (Granted) |