R & D : Mechanical Engineering

Journal Paper

2018-19

  1. Effect of different chill parameters on solidification of casting – A Review

         Author:Mamta Patel

         Journal:International Journal of Technical Innovation in Modern Engineering & Science

         E-ISSN: 2455-2585

  1. Fabrication and parametric analysis of waste plastic to fuel – a review paper

        Author:Mamta Patel

        Journal:International Journal of Technical Innovation in Modern Engineering & Science

       E-ISSN: 2455-2585

  1. A Review paper on Aerodynamic Drag Reduction and CFD Analysis of Vehicles

        Author:Subhashish Sarkar

       Journal:International Research Journal of Engineering and Technology

       ISSN:2395-0056

  1. A Review Paper On Magneto-Rheological Fluid based Braking system

       Author:Subhashish Sarkar

       Journal:International Journal of Research and Analytical Reviews

       E-ISSN:2348-1269

  1. A Review Paper on- Evolution of cutting fluid mixed with nano particles on surface roughness and tool wear

       Author:ChetankumarGohel

       Journal: Intentional journal of science and research

       E-ISSN: 2319-7064

  1. Drilling of GFRP Composite : A Review

       Author:Vyomesh R. Buch

       Journal:International  Journal of Recent Scientific Research

       E-ISSN:0976-3031

       DOI: 10.24327/ijrsr.2018.0909.1783

  1. Finite Element Analysis of Non Metallic Helical Gear

       Author: Sanjay Ansodariya

       Journal:Intenational Journal of futuristic trends in engineering and technology

       E-ISSN:2348-4071

  1. Review of lean-green manufacturing practices in SMEs for sustainable framework

       Author:MandarSumant

       Journal: International Journal of Business Innovation and Research

       ISSN online: 1751-0260

       ISSN print: 1751-0252

  1. Variation in Aerodynamic Drag and Lift by addition of rear spoiler in a passenger car

       Author:Subhasis Sarkar

       Journal:Journal of Emerging Technologies and Innovative Research

       ISSN online:2349-5162

  1. A Review Paper On Rotational Energy Harnessing From A Non-Fixed Axis System

       Author:Subhasis Sarkar

       Journal:Journal of Emerging Technologies and Innovative Research

       ISSN online:2349-5162

  1. Modeling of Machining Parameters of Structural Steel using Plasma Arc Cutting: A Response Surface Approach

       Author:Ketul Patel

       Journal:International Journal of Engineering Research and Technology

  1. Optimizing Plasma Arc Cutting Parameters for Structural Steel using Grey Relational Analysis

       Author:Ketul Patel

       Journal:International Journal of Engineering Research and Technology

  1. Structural shape optimization with meshless method and swarm-intelligence based optimization

       Author:SachinDaxini

       Journal:International Journal of Mechanics and Materials in Design

       ISSN (P): 1569-1713

       ISSN(E): 1573-8841

Numerical shape optimization based on meshless method and stochastic optimization optimization

       Author: SachinDaxini

       Journal: Engineering with Computers

       ISSN (P): 0177-0667

       ISSN(E): 1435-5663

  1. Coupling of Finite Element and Meshfree Method for Structure Mechanics Application: A Review

       Author:GaurangRohit

       Journal: International Journal of Computational Methods

       ISSN (P): 0219-8762

       ISSN (E): 1793-6969

  1. Prioritizing the performance outcomes due to adopting of critical success factors of supply chain remanufacturing

       Author:Zulfiquar Ansari

       Journal: Journal of Cleaner Production, Elsevier

       ISSN (P): 0959-6526

2017-18

  1. Hydro Carbon and Carbon Monoxide Reduction from Exhaust of Vehicles

       Author:RonakSoni

       Journal: International Journal of Engineering Advanced Technology

       E-ISSN:2249-8958

  1. Bonding of Thermoplastic Material: A lilterature review

       Author:Pritesh Patel

       Journal:International Research Journal of Engineering and Technology

       E-ISSN: 2395-0056

  1. Productivity Improvement by Implementing Lean Manufacturing Tools in
    Manufacturing Industry

       Author:Pritesh Patel

       Journal:International Research Journal of Engineering and Technology

       E-ISSN: 2395-0056

  1. Modification and Experimental Analysis of Motorcycle Exhaust System with Use of Exhaust Emission Reducer Material

       Author:Vishvash Patel

       Journal:International Journal of Advance Enginering and Research Development

      E-ISSN:2348-4470

  1. 2D Simulation Studies on Use of Boundary Layer Trip for Airfoil E216

       Author:Vishvash Patel

       Journal:International Journal for Research in Applied Science and Engineering Technology

       E-ISSN:2321-9653

  1. Development of Software for Design of Hydrodynamic Journal Bearing

       Author:Pratik P Patadia

       Journal:International Journal of Innovative Research in Technology

       ISSN:2349-6002

  1. Experimental Investigation of 1.5 Tonne Air Conditioning System by using Heat Pipe

       Author:NitinPawar

       Journal:International Journal of Engineering and Management Research

       ISSN:2394-6962

  1. A Review Report for Study of dry Drilling on completely different Materials exploitation numerous machining strategies

       Author:Sanjay Ansodariya

       Journal:Journal of Mechatronics and Automation

       ISSN:2455-1988

  1. A Literature review on the Development of Tube’s Inner Surface Polishing

       Author:MandarSumant

       Journal:Journal of Basic and Applied Engineering Research

       ISSN (P): 2350-0077

       ISSN (E): 2350-0255

10.  Design and Fabrication of Maize Shelling Machine

       Author: MandarSumant

       Journal: Journal of Material Science and Mechanical Engineering

       ISSN: (P): 2393-9095

       ISSN (E): 2393-9109

11.  Parametric shape optimization techniques based on Meshless Methods: A review

       Author: SachinDaxini

       Jounral:Structrual and Multidisciplinary Optimization

       ISSN: 1615-147X (Print)

       ISSN: 1615-1488 (Online)

12.  Exploring the framework development status for sustainability in supply chain management: A systematic literature synthesis and future research directions

       Author: Zulfiquar Ansari

       Journal:Business Strategy and the Environment

       ISSN (P): 1099-0836

13.  Design for disassembly to attain sustainability: Analyzing the past and proposing further research opportunity

       Author:Zulfiquar Ansari

       Journal:IUP Journal of Supply Chain Management

       ISSN (P): 0972-9267

2016-2017

       1. Hydrogen based internal combustion engine

       Author:Subhasis Sarkar

       Journal:International Journal of Scientific Research and Development (IJSRD)

       ISSN:2321-0613

  1. Research paper on bladeless windmills based on the principle of vibration

       Author:Subhasis Sarkar

       Journal:International Journal of Scientific Research

       ISSN:2277-8179

  1. Bladeless turbine – A review

       Author: Pratik Patel

       Journal: International Journal of Mechanical Engineering & Technology (IJMET)

       ISSN:0976-6340

  1. Acoustically driven refrigeration device: A review

       Author:Pratik Patel

       Journal:International Journal of Mechanical Engineering & Technology (IJMET)

       ISSN:0976-6340

  1. Design of a simplified vertical conveyor system

       Author:Alok Kumar Dwivedi

       Journal:International Research Journal of Engineering and Technology

       ISSN:2395 -0056

  1. Performance analysis of concentric tube solar water heater

       Author:Ramesh Mevada

       Journal:International Journal for Innovative Research in Science & Technology

  1. Experimental and simulation progress on deep drawing process.

       Author:Sanjay Ansodariya

       Journal:International Journal of Scientific Research and Development

       ISSN:2321-0613

  1. Experimental evaluation and optimization of dry drilling parameters of stainless steel using different drill bit

       Author:Sanjay Ansodariya

       Journal: Journal of Materials and Metallurgical Engineering

       ISSN:2321-4236

  1. Experimental analysis of spiral heat exchanger

       Author:Ketan N. Jambu

       Journal:International Journal of Advance Research in Engineering Science and Technology

       ISSN:2393-9877

  1. A state of art literature review reflecting 15 years of focus on sustainable supply chain management

        Author:Zulfiquar Ansari

       Journal: Journal of Cleaner Production

       ISSN:0959-6526

2015-2016

  1. Design and fabrication of automatic main stand for two-wheelers

       Author:Alok Kumar Dwivedi

       Journal:International Journal for Scientific Research & Development

       ISSN: 2321-0613

  1. Design and fabrication of automatic main stand for two-wheelers

       Author:Nirmal Kumar Kushwaha

       Journal:International Journal for Scientific Research & Development

       ISSN: 2321-0613

  1. Design, development and comparison of double pipe heat exchanger with conventional and annular baffles

       Author:Mukund B. Pandya

       Journal:International Journal of Advance Research in Engineering Science and Technology

       ISSN:2393-9877

  1. Sustainability in supply chain management: An overview

       Author:Zulfiquar Ansari

       Journal:IUP Journal of Supply Chain Management

       ISSN: 0972-9267

2014-2015

  1. Simulation of bucket of bucket wheel stacker reclaimer

       Author:Ankur P Patel

       Journal:International Journal of Engineering Development and Research

       ISSN: 2321-9939

  1. Identify the lean tool for different industrial sectors in India

       Author:MandarSumant

       Journal:International Journal of Engineering Development and Research (IJEDR)

       ISSN:2321-9939

  1. Importance of lean tools and techniques in industrial sectors: a literature review

       Author:MandarSumant

       Journal:International Journal of Applied Engineering Research (IJAER)

       ISSN:0973-4562

  1. Parametric analysis of deep drawing process for hemisphere dome shape of Steel AISI 1023

       Author:MandarSumant

       Journal:Journal of Basic and Applied Engineering Research(JBAER)

       ISSN:2350-0077, 2350-0255

  1. A review of circular solar water collector for close water open air (CWOA) air heated humidification and dehumidification process

       Author:MandarSumant

       Journal:Journal of Basic and Applied Engineering Research(JBAER)

       ISSN:2350-0077, 2350-0255

  1. Theoretical model of circular solar collector for close water open air (CWOA) heated humidification and dehumidification

       Author:MandarSumant

       Journal:International Journal of Renewable Energy and Environmental Engineering (IJREEE)

       ISSN:2348-0157

  1. Effect of Air inlet temperature on performance of circular solar collector for close-water open-air (CWOA) air heated humidification –dehumidification process

       Author:Mandar Sumant

      Journal:International Journal of Advance Engineering and Research Development (IJAERD)

      ISSN: 2348-4470, 2348-6406

  1. Effect of overall Heat loss coefficient on performance of Circular Solar collector for close water open air (CWOA) humidification dehumidification process

       Author:MandarSumant

       Journal:International Journal of Advance Engineering and Research Development (IJAERD)

       ISSN:2348-4470, 2348-6406

  1. Performance of Circular Solar collector for Close Water Open Air (CWOA) Air heated humidification-dehumidification process for finding the effect of Air flow rate on efficiency of solar air heater

        Author:MandarSumant

       Journal:International Journal of Renewable Energy and Environmental Engineering

       ISSN:2348-0157

  1. Condition based monitoring of rotating machines using piezoelectric material

       Author:Nirmal Kumar Kushwaha

       Journal:International Journal of Research in Engineering and Technology

       ISSN:2319-1163, 2321-7308

Conference Papers

2019-20

  1. An analysis of remanufacturing supply chain economic risks using fuzzy SWARA

       Author:Zulfiquar Ansari

5th International Conference on Industrial Engineering (ICIE-2019)

2017-18

  1. Expert System for Design of Compound Die Components

       Author:Ronak D. Soni

PiCET – International Conference, PU

  1. Review of Lean Manufacturing Philosophy in Manufacturing SMEs to Identify Critical Success Factors

       Author:MandarSumant

Proceedings -4th International conference on Industrial Engineering, ICIE 2017

      ISBN: 978-93-86238-39-9

  1. A Literature Review on Drivers and Barriers of Green Manufacturing
    in Indian / Global SME’s

       Author:MandarSumant

Proceedings -4th International conference on Industrial Engineering, ICIE 2017

       ISBN: 978-93-86238-39-9

2016-17

  1. Study of Mechanical and Structural properties of PCL/TCP composite using Selective Laser Sintering

       Author:MandarSumant

Proceedings of 2nd International Conference on Emerging Trends in Mechanical Engineering

      ISBN: 978-93-84659-77-6

 

2015-16

  1. Expert system for designing of compound die for washer manufacturing

       Author:Ronak D. Soni

       International Conference – Copen 9, IIT-B

  1. Meshless formulation and parameters study for an elastic bar problem

       Author:SachinDaxini

International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) , DMI College of Engineering, Chennai

      DOI – 10.1109/ICEEOT.2016.7754975

  1. Parametric study in Element Free Galerkin method for an elastic bar

       Author:SachinDaxini

International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) , DMI College of Engineering, Chennai

       DOI – 10.1109/ICEEOT.2016.7754740

2014-15

  1. Scope of expert system in product development and manufacturing cycle

       Author:Ronak D. Soni

       Conference:MEGRES – 15

 

Patents filed

Sr. No. Application Number Filing Date Applicants Inventors Title of Invention Status (Applied / Published / Granted)
1.      U 201921013579 04/04/2019 Unraniya Ravi Sanjaybhai, Katharotiya Viraj Sureshbhai, Parmar Vipul Govindbhai, Patel Shreya Narendrabhai, Vasava Shivani Manubhai Unraniya Ravi Sanjaybhai, Katharotiya Viraj Sureshbhai, Parmar Vipul Govindbhai, Patel Shreya Narendrabhai, Vasava Shivani Manubhai BAND SAW BLADE TENSION AND BREAKAGE SENSOR

(Guided by: Pratik Patel)

Publication No.16/2019

Publication Date: 19/04/2019

(Granted)