Local/Regional

/National/International

2016-17

Dhruv Joshi

Paras Jani

Jay Patel

Aniket Baraiya

Shah Neil

Shah Abhishek

Shah Mihil

Raval Dhairya

Shah Yash

Rakesh Surti

Urmil Thakkar

Parth Dahivalkar

Priyal Panchal

Komal Gohil

Palak Prajapati

Deep Panchal

Got 3rd prize in the project fair organised at GCET, V.V.Nagar

Ridham S. Patel

Hardik R. Sakpal

Vyom S. Shukla Yashkumar S. Patel

Amin Het

Kadam Karan

Parmar Dipesh Patel Nirav

Selected for Patent filling for the final year project titled “Hybrid Two-wheeler  (ICE + Electric Drive)”

Maharshi Pathak

Saurabh Mistry

Yash Mishra

Rutvik Shah

Siddharth Sharma

Najib Shaikh

Aakash Kavi

Kunal Kalavadia

Kush Patel

Avi Patel

Senil Tailor

Muzmmil Mansuri

Pruthupal Matroja

Narayan Mudaliar

It was found out that the vertical orientation of the resonator tube resulted in the heating of the speaker end because the wave propagation was not appropriate. Moreover temperature difference of 1.2℃ was obtained when heat exchangers were not placed. After placing heat exchangers on either side of heat exchangers, temperature difference of 3.5℃ was obtained.

The horizontal orientation of the resonator tube was more effective compared to the vertical orientation. Moreover temperature difference of 3.1℃was obtained when heat exchangers were not placed. After placing heat exchangers on either side of heat exchangers, temperature difference of 6℃was obtained.

At higher frequencies the time taken for generating the temperature difference was more compared to smaller frequencies. Thus, 90-110 Hzfrequency was found appropriate for the effective performance of the system.

The setup without using heat exchanger was not effective as it resulted in heating of the speaker end as the heat was not rejected to the surrounding. Thus, it is necessary to provide two heat exchangers on either side of the stack for effective performance.

Ambient conditions and working fluid also affect the performance of the device. The COP obtained for the device using air as working fluid is 3.33and the refrigeration capacity obtained is 10 KJ/kg.

Prof. Pratik R. Patel

We can see that all the production based industries wanted low production cost and high work rate which is possible through the utilization of multi-function operating machine which will less power as well as less time, since this machine provides working at different center it really reduced the time consumption up to appreciable limit.

In an industry a considerable portion of investment is being made for machinery installation. So in this paper we have proposed a machine which can perform operations like drilling, sawing, grinding at different working centers simultaneously which implies that industrialist have not to pay for machine performing above tasks individually for operating operation simultaneously.

Now a days a big issue of water pollution and its effects the environment also effect the water life cycle and due to oil spill many species of fishes and animals dies. So it is our little contribution to reduce the water pollution and save the environment which is polluted due to oil spill. This report contains studies different types of oil water separator. First, there far more research on oil spill behavior. This studies of how oil spill occurs and how we can separate oil from water. As practical overview of different oil spill cleanup method, this paper has illustrated several limitations of these methods and current oil spill technology. Research and testing, to improve existing techniques and equipment or to discover totally new methods of cleanup, are needed so that environment damage from oil spills.

As per over project modal oil recovery rate is high on poly belt but poly belt collected oil water contain is more as compare to PVC and Asbestos roller. So oil refinery cost is increase in poly belt. But In asbestos roller is give very small amount of water partial as compare to other roller materials. All typed of oil water skimmer studies and analysis conclude that modified the design of oil skimmer with adding shaft design, results in increase the efficiency and using of different type of roller in place of rope, disc or drum could result in lower initial cost. It also eliminates complex design of other type of oil skimmer. Also use the different roller materials and experiment all materials and collect oil by using striper.